How To Factory Reset Blink Doorbell Camera “In 5 min”

Factory reset your Blink doorbell camera if you are experiencing any technical issues with it or for any other reason. Follow the steps below and you will be able to factory reset your Blink doorbell in just 5 minutes.

Before We Begin

Before diving into the reset process, let’s gather a few required things:

• Tools Required: You’ll need a paperclip or a thin screwdriver to press the reset button.
• Optional Video Clip Backup: If you have any important clips stored in the Blink app, consider downloading them beforehand. The reset will erase them from the camera’s memory.
• Post-Reset Re-Connection:: Resetting wipes out the connection between your Blink camera and the Blink app. Don’t worry, though, we’ll guide you through setting it up again after the reset.

How To Factory Reset Blink Doorbell Camera

Power Down:

Take down your doorbell unit. If you’re unsure how to remove the doorbell from its bracket, refer to the Blink user manual for specific instructions. Typically, there’s a release mechanism or screws involved.

Reset Button:

1. Flip the doorbell: Once you’ve taken down the doorbell unit, gently turn it over to reveal the back panel.
2. Locate the tiny button: Look for a small recessed button on the back of the doorbell. It might be nestled in a tiny hole for extra protection from accidental presses.

Hold for 30 Seconds:

1. Press and hold firmly: Use your paperclip or screwdriver to press the reset button firmly for a full 30 seconds.
2. Observe the LED light: While holding the button, pay attention to the LED light on the front of the doorbell. It should start blinking red during this 30-second period. This signifies the reset process is underway.

Release and Watch:

1. Let go after 30 seconds: After a full 30 seconds of holding the button, release it.
2. Observe the LED light again: The LED light on the front might continue blinking red for a few additional moments. This blinking red light indicates a successful reset.

Optional: Post-Reset Re-Connection in the Blink App

1. Open the Blink app: You can optionally remove the doorbell from your Blink app to ensure a clean setup process later. Open the Blink app on your phone or tablet.
2. Find your doorbell: Navigate to the device list within the app and locate your Blink doorbell camera.
3. Delete the doorbell (optional): If you want a fresh start during setup, tap on your doorbell and select the “Delete” option within the app.

And that’s it! Your Blink doorbell camera is now reset and ready to be re-added to your Blink system through the app. The app will guide you through connecting to your Wi-Fi network during the setup process.

Bringing Your Blink Doorbell Back Online: Reconnection

Now after the reset, it’s time to bring it back into your Blink system:

• Blink App: Grab your smartphone or tablet and launch the Blink app. The app will guide you step-by-step through the setup process, just like it did when you first set up your doorbell.
• Wi-Fi: During the setup process, the app will ask you to reconnect your doorbell camera to your Wi-Fi network. Just follow the on-screen instructions, entering your Wi-Fi password when prompted.

Your Blink doorbell camera should now be successfully reconnected to your Blink system and your Wi-Fi network. You can now enjoy the peace of mind and security your Blink doorbell provides.

WRAP UP:

Factory resetting your Blink doorbell camera is a simple process that can take as little as 5 minutes. If you’re experiencing technical difficulties or simply want a fresh start, follow the steps outlined in this guide. Remember to gather the necessary tools, consider backing up any important video clips, and prepare to re-connect the doorbell to your Blink system and Wi-Fi network after the reset. With a reset Blink doorbell camera, you can ensure optimal performance and continued peace of mind for your home security.