Is your Ring Doorbell Flashing Blue? Here’s a quick fix (2024)

ring doorbell flashing blue

The circular LED light in the front of the ring doorbell isn’t just for decoration. Its blue, red and white lights have a vital role in notifying the owner and keeping him informed about the activity and status of the device.

But how can you figure out why is your ring doorbell flashing blue and what message it wants to convey?

Don’t worry after reading this guide you will know all about the patterns of the blue flashing lights and what message it’s conveying. And we’ll be able to troubleshoot any potential issue.

Understanding the Blue Light  Patterns

Here are some common patterns of the ring flashing blue light and what it means

  • Charging: If the light  moves upward it means your device is charging.
  • Wifi Connection: When the LED light flashes four times it means your device is in setup mode or establishing connection with your Wifi.
  • Button Press or Speaker Activation: A single blue flash means someone is pressing the doorbell button or the built-in speaker being triggered.
  • Flashing Blue Circle (Normal Operation): It means your doorbell is awake and alert, and is functioning normally.

Ring Doorbell Flashing Blue Light: A Model-by-Model Guide

This guide covers every ring doorbell and why it flashes blue light. This will make it easier to know why your ring doorbell is flashing blue.

Ring Video Doorbell (1st to 4th Generations)

These classic Ring Doorbells utilize a common set of blue light patterns:

Flashing Blue Light Moving Upwards:

During setup, this animation signifies your Ring Doorbell is actively connecting to your Wi-Fi network.

Four Blue LED Light Flashes:

This pattern indicates a successful setup and your doorbell is now ready to protect your entryway.

Flashing Blue Light Cycling Around:

Is your doorbell plugged in? This pattern signifies the Ring Doorbell is currently charging. The blue light might even indicate the charging progress with a full circle appearing when fully charged.

Ring Doorbell Wired and Ring Peephole Cam

These wired Ring Doorbells and the Ring Peephole Cam have some unique blue light signals:

Flashing Blue Light Spinning Around:

Someone just pressed the button! This pattern signifies a button press on your Ring Doorbell Wired or Peephole Cam.

Flashing Blue Light Moving Upwards:

Just like its video doorbell counterparts, this animation signifies the device is connecting to Wi-Fi during setup.

Four Blue LED Light Flashes:

Another celebratory sequence! This pattern indicates a successful setup and your doorbell is now ready for action.

Flashing Blue Circle:

Is your Ring device restarting or updating its firmware? This pattern signifies the device is booting up, with the blue flashes stopping once the process is complete.

Solid Blue Light:

Did someone activate the speaker on your Ring Doorbell Wired or Peephole Cam? This solid blue light signifies the speaker is enabled.

Rapid Flashing Blue Light:

Did you just reset your Ring device to factory settings? This rapid burst of blue flashes confirms a successful reset, followed by a spinning white light.

Ring Video Doorbell Pro and Pro 2

These feature-packed Ring Doorbells boast a few additional blue light patterns:

Flashing Blue Light Spinning Around:

Someone just gave the doorbell a press! This pattern signifies a button press on your Ring Video Doorbell Pro or Pro 2.

Flashing Blue Light Moving Upwards (Same as Ring Video Doorbell/Wired/Peephole Cam):

Consistent across Ring Doorbells, this animation signifies the device is connecting to Wi-Fi during setup.

Four Blue LED Light Flashes:

Another victory dance! This pattern indicates a successful setup and your doorbell is now on guard duty.

Flashing Blue Circle:

Is your Ring device rebooting or updating its firmware? This pattern signifies the device is booting up, with the blue flashes stopping once the process is complete.

Solid Blue Light:

Did someone activate the speaker on your Ring Video Doorbell Pro or Pro 2? This solid blue light signifies the speaker is enabled.

Rapid Flashing Blue Light:

Did you just reset your Ring device to factory settings? This rapid burst of blue flashes confirms a successful reset, followed by a spinning white light.

Top Half LED’s Flashing Blue:

This pattern on Pro and Pro 2 models has a dual meaning depending on the doorbell’s state. During setup, a flashing top half signifies an incorrect Wi-Fi password. After setup, this pattern indicates the device is charging.

Troubleshooting Steps

When you Identify why your ring doorbell is flashing blue then follow these troubleshooting steps to fix it in few minutes:

Check Your Wi-Fi Connection:

weak and unstable wifi signals also cause problems in the proper functioning of your ring doorbell. Ensure your connection strength and check your Wi-Fi connection stability in the Ring app. Also, make sure to connect with the Right network.

Restart or Reset Your Ring Doorbell:

sometimes a normal restart can fix many small problems with your Ring doorbell. If restarting didn’t work then factory reset your ring doorbell. But note that a factory reset will erase all your data and configuration.

Contact Ring Support:

If the blue light is still blinking after applying the above steps, there might be a hardware issue with your doorbell. you Contact Ring’s customer support for further assistance. They can provide personalized troubleshooting guidance and ensure your warranty remains valid.

Additional troubleshooting Tips

  • Ensure your Ring Doorbell is within optimal Wi-Fi range to avoid connection issues.
  • Keep your Ring Doorbell software up-to-date for good performance.
  • If you’re facing battery-related issues (applicable models), ensure you’re using the correct type of batteries and replace them when necessary.

Can you Turn Off the Blue Light on Your Ring Camera

No, there’s no feature right now to disable the blue flashing light in the ring doorbell camera. But rings constantly update their app and firmware, so there’s a chance they’ll introduce it in the future. 

Conclusion

Ring doorbell flashing blue meaning in every ring device is different as we have explain that earlier. and by following the above guide you can easily understand why your ring doorbell is flashing blue and by applying the above troubleshooting steps you can easily fix your issue with the blue light in ring doorbell.

What a blue flashing light means on youe Ring Doorbell?

A flashing blue light generally means your Ring Doorbell is:
Booting up: If it’s a quick, 1-second interval flash, it’s restarting. This can happen after a power outage or update.
Charging: Newly installed Ring Doorbell (especially Ring Video Doorbell Pro & Pro 2) will have a solid blue circle flashing while the internal battery charges.
Connecting to Wi-Fi: Circling blue flashing light means its connecting to Wi-Fi during setup..

My Ring Doorbell is stuck flashing blue How can I fix it?

If the blue light is stuck in flashing blue light then try these steps:
Check your Wi-Fi: Make sure your Wi-Fi is working and your Ring doorbell is in a good range with Wi-Fi.
Restart your Router: By Restarting your router connection will be refreshed.

Does a flashing blue light mean my Ring Doorbell is connected to Wi-Fi?

It’s not necessary, flashing blue light usually indicates charging, startup or searching for Wi-Fi. (You can check your model’s specific light pattern above in this article)

What happens after the blue light stops flashing on my Ring Doorbell?

When the charging or booting is complete the light pattern will change depending on the situation:
Solid white or blue light: Indicates a successful setup and connection.
Circling white light: Indicate it’s ready for you to connect to the Ring app during setup.

How do I reset my Ring Doorbell if it’s stuck flashing blue?

The reset process varies slightly between models. Check your Ring Doorbell user manual for specific instructions, but it generally involves holding down a button for few seconds and it will automatically restart.

Related posts:

Ring motion alerts vs motion warning

Motion detection vs motion alerts

Leave a Comment